Generator Controller

Product Details:

Product Details:

Product Details:

• The D-300 is a cost effective, modern technology genset controller ready for internet monitoring.
• Its main advantages are multifunctionality,support for multiple topologies, harmonic analysis and detailed power measurements.
• Software features are complete with easy firmware upgrade through USB port.
• The Windows based PC software allows monitoring and programming through USB, RS-232 and GPRS.
• 400Hz operation support
• 400 event logs, full snapshot
• All parameters front panel editable
• 3 level configuration password
• 128x64 graphical LCD display
• Downloadable languages
• Waveform display of V & I
• Harmonic analysis of V & I
• 16Amp MCB & GCB outputs
• 8 configurable digital inputs
• 6 configurable digital outputs
• 3 configurable analog inputs
• Both CANBUS-J1939 & MPU
• 3 configurable service alarms
• Multiple automatic exerciser
• Weekly operation schedule
• Dual mutual standby with
•  equal aging of gensets
• Manual “speed fine adjust” on selected ECUs
• Automatic fuel pump control
• Disable protections feature
• Excess power protection
• Reverse power protection
• Overload IDMT protection
• Load shedding, dummy load
• Multiple load management
• Current unbalance protection
• Voltage unbalance protection
• Fuel filling & fuel theft alarms
•  Battery back-up real time clock
• Idle speed control
• Battery charge run enabled
• Combat mode support
• Multiple nominal conditions
• Contactor & MCB drive
• 4 quadrant genset power counters
• Mains power counters
• Fuel filling counter
• Fuel consumption counter
• Modem diagnostics display
• Configurable through USB, RS-232 and GPRS
• Free configuration program
• Allows SMS controls
• Ready for central monitoring
• Mobile genset support
• Automatic GSM geo-location
• GPS connectivity (RS232)
• Easy USB firmware upgrade
• IP65 rating with optional gasket

• 4-band GPRS modem (optional)
• USB Device
• RS-232 (2400-57600baud)
• J1939-CANBUS
• Geo-locating through GSM
• GPS support (RS-232)
• Internet Central Monitoring
• SMS message sending
• E-mail sending
• Free PC software: Rainbow Plus
• Modbus RTU

• 3 ph 4 w, star & delta
• 3 ph 3 w, 2 CTs
• 2 ph 3 w
• 1 phase 2 wires

Product Details:

• The D-500 is a next generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low cost design. The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category. Software features are complete with easy firmware upgrade process through USB port. The Windows based PC software allows monitoring and programming through USB, RS-485, Ethernet and GPRS. The PC based Rainbow Scada software allows monitoring and control of an unlimited number of gensets from a single central location.

• AMF unit with uninterrupted transfer
• ATS unit with uninterrupted transfer
• Remote start controller
• Manual start controller
• Engine controller
• Remote display & control unit
• Waveform display of V & I
• Harmonic analysis of V & I
• CTs at genset or load side

• Ethernet
• GSM-GPRS
• Internal GPRS modem (optional)
• Embedded web server
• Web monitoring
• Web programming
• GSM-SMS
• e-mail
• Modbus RS-485
• Modbus TCP/IP
• SNMP
• USB Host (optional)
• USB Device
• RS-485
• RS-232 (optional)
• Micro SD card slot (optional)

• 2 phases 3 wires, L1-L2
• 2 phases 3 wires, L1-L3
• 3 phases 3 wires, 3 CTs
• 3 phases 3 wires, 2 CTs (L1-L2)
• 3 phases 3 wires, 2 CTs (L1-L3)
• 3 phases 4 wires, star
• 3 phases 4 wires, delta
• 1 phase 2 wires